Medium-AC servo frequency cross-propelled robot

BRP Series are adequate for150-550 tons’ various types of horizontal injection molding machines products and water pop. Upper and lower arm is double-cut style including single-arm and both arms, which well fit the three plate mold removal. Transverse drive has inverter and AC servo motor drive.Installation of mechanical hand can increase production capacity (10-30%), lower defect rate of products and labor cost, protect operator safety, control of production precisely and reduce waste.

Main feature

Body structure

Transverse axis adopts AC servo motor drive or motor drive inverter, and up-down and pull-push adopt precision cylinder drive.

X, Y, Z axis all adopt High-precision high-rigiditydump rail and wider and thicker aluminum alloy extrusion beams with Light weight, high rigidity, Which made high speed, low noise and High-precision positioning (+-0.1mm) possible, also it is durable and can well keep balance when the arm down without jittering.

Double-cut type arm:

Linear Slides and high rigid aluminum beam structure, specially designed belt speed structure has been adapted, which greatly reduced the height between the upper and lower cylinder and achieve maximum results with little effort.

In addition to increase the speed and stability of the upper and lower rows, it can well fit the plant in low place.

Reverse side structure:

It can take out together with the male mold or female mold and be well fixed 90 degree chamfer.

Adsorption unit:

It set aside suck in / hold loops, it can suck in and hold at the same time, which can be adapted to taking out variety of product.

Automatic security:

It can automatically detect the adequacy of supply pressure. If the pressure is insufficient, it can automatically display a low pressure alarm and pop off the cylinder to prevent the arm fall down.

Control system:

Handheld device is easy to learn and operate. It was built-in eight groups program and L / U-type function, which is suitable for removing of all types of mold removal.

It can modify the timing, counting, and easy to control the robot arm speed during automatic operation.

Transverse AC servo motor drive can make products’ multi-point and recycling placing, no more than 99 points.

It can used for whole factory automation together with plate test, shear nozzle device, Compartment safety testing, Compartment safety testing.